XRP → BNB

ordenar por

tipo de tasa

Flotante Fija

Cotizaciones a tasa de mercado (pueden cambiar antes de ejecutarse).

root@notkyc:~$ tasas en caché para todos · ttl 60s · 57s

#	Casa de cambio	Puntuación	Historial sin KYC?	Tasa	Recibes (1 XRP)	Límites (XRP)
1	FixedFloat MEJOR	D priv 45trust 67	0/1 KYC-free	1 XRP = 0.001965 BNB	0.001965 BNB	min 0.8976 · max 68697.0738	intercambiar en notkyc	intercambiar en FixedFloat →
2	Baltex	D priv 40trust 65	—	1 XRP = 0.00194232 BNB	0.00194232 BNB	min 0.44908848		intercambiar en Baltex →
3	SideShift	C priv 48trust 78	—	1 XRP = 0.00193237 BNB	0.00193237 BNB	min 2.674512 · max 26618.463247		intercambiar en SideShift →
4	XMRS	C priv 61trust 71	6/6 KYC-free	1 XRP = 0.0019 BNB	0.0019 BNB	min 89.1265 · max 891265.5971	intercambiar en notkyc	intercambiar en XMRS →

FixedFloat MEJOR D

Tasa1 XRP = 0.001965 BNB

Recibes0.001965 BNB

Límitesmin 0.8976 · max 68697.0738 XRP

intercambiar en notkyc intercambiar en FixedFloat →

Baltex D

Tasa1 XRP = 0.00194232 BNB

Recibes0.00194232 BNB

Límitesmin 0.44908848 XRP

intercambiar en Baltex →

SideShift C

Tasa1 XRP = 0.00193237 BNB

Recibes0.00193237 BNB

Límitesmin 2.674512 · max 26618.463247 XRP

intercambiar en SideShift →

XMRS C

Tasa1 XRP = 0.0019 BNB

Recibes0.0019 BNB

Límitesmin 89.1265 · max 891265.5971 XRP

intercambiar en notkyc intercambiar en XMRS →

Swapping XRP to BNB moves you from a payment-focused ledger optimized for cross-border settlement into the BNB Chain ecosystem, where you can interact with BSC dApps, pay gas on opBNB, farm on PancakeSwap, or stake for launchpad access. Both assets settle in seconds with sub-cent fees, so a no-KYC swap here avoids the friction of routing through a CEX that would freeze funds for a 'compliance review' on either side.

// sobre este par

What makes XRP -> BNB specific

XRP settles on the XRP Ledger in 3-5 seconds with a fixed fee around 0.00001 XRP. BNB exists on multiple networks: BNB Beacon Chain (BEP2, mostly deprecated), BNB Smart Chain (BEP20, the default for DeFi), and as a wrapped asset on other chains. Most aggregator routes deliver BEP20 BNB, which is what you want if you plan to use PancakeSwap, Venus, or any BSC dApp. Confirm the destination network before signing - sending to a Beacon Chain address by mistake can mean permanent loss.

Liquidity for this pair is deep across both floating and fixed-rate providers because XRP and BNB sit in the top 10 by market cap. Spreads are usually tight (0.3-0.8 percent above mid-market), but during XRP volatility spikes - common around SEC-related news - floating rates can drift mid-swap.

Choosing a route and sizing the trade

Network match: verify the deposit tag/destination tag for XRP and the BEP20 address for BNB. XRP requires a destination tag for most exchange deposits; missing it delays or loses funds.
Rate type: fixed rates lock the quote but charge a wider spread; floating rates track market but can shift if confirmations lag.
Min/max: XRP-to-BNB minimums are typically low (around 20-50 XRP) since both chains are cheap to settle.
Refund address: always provide one. If the rate window expires or the deposit arrives outside min/max bounds, you need a return path.

Practical tips: do a small test swap first if the amount is significant, avoid swapping during major BNB Chain congestion (rare but happens during memecoin launches), and check that the quoted rate is within 1 percent of the CEX mid-price shown on a reference like CoinGecko before committing. Keep the destination tag visible in your records until the BNB lands.

// preguntas

Do I need a destination tag when sending XRP to the swap service?

Yes, almost always. Aggregator deposit addresses are shared across many users, and the destination tag is how the service routes your XRP to your specific order. Sending XRP without the tag means the service cannot identify your deposit, and recovery can take days or fail entirely. The tag is shown alongside the deposit address - copy both.

Which BNB network will I receive - BEP20 or Beacon Chain?

Modern aggregators default to BEP20 (BNB Smart Chain), since Beacon Chain was sunset in 2024. Confirm the network label before pasting your address. A BEP20 address starts with 0x and is EVM-compatible, so any MetaMask or Rabby wallet works. Do not send to an old bnb1... Beacon Chain address - those are no longer supported.

How long does an XRP to BNB swap take end to end?

Typically 2-5 minutes. XRP confirms in about 4 seconds, the swap service needs 1-2 ledger confirmations, then BNB settles on BSC in roughly 3 seconds per block with finality around 45 seconds. Most delays come from the service's internal processing or rate-lock checks, not the chains themselves.

Why does the rate I see differ from the XRP/BNB price on CoinGecko?

Aggregators quote a net rate that includes the provider's spread, network fees for both the incoming XRP transaction and outgoing BNB transaction, and a margin for volatility during the rate-lock window. Expect 0.3 to 1.5 percent below the reference mid-price. Fixed-rate quotes carry a wider spread than floating because the provider absorbs price risk.

Is there a minimum amount for swapping XRP to BNB?

Minimums vary by provider but usually sit between 20 and 60 XRP. The floor exists because network fees and operational overhead make tiny swaps uneconomical. Maximums for no-KYC swaps typically range from 10,000 to 100,000 USD equivalent per order; larger trades may be split or trigger an enhanced review depending on the provider.

Can I swap directly from an XRP Ledger wallet to a hardware wallet holding BNB?

Yes. Send XRP from any XRPL wallet (Xumm, Ledger, etc.) including the destination tag, and specify your hardware wallet's BEP20 address as the payout. The swap service does not need to know either wallet - it just needs valid addresses. This non-custodial flow is the main reason to use an aggregator instead of a centralized exchange.

// relacionados