← todas las casas de cambio

XRP LTC

tipo de tasa
Cotizaciones a tasa de mercado (pueden cambiar antes de ejecutarse).
root@notkyc:~$ tasas en caché para todos · ttl 60s · 0s
# Casa de cambio Puntuación Historial sin KYC? Tasa Recibes (1 XRP) Límites (XRP)
1 OctoSwap MEJOR A priv 87trust 70
// no on-platform swaps yet
1 XRP = 0.025509 LTC 0.025509 LTC min 6236.746913 · max 1069156.613625 intercambiar en notkyc intercambiar en OctoSwap →
2 FixedFloat D priv 45trust 67
0/1 KYC-free
1 XRP = 0.02538 LTC 0.02538 LTC min 0.8968 · max 10638.6444 intercambiar en notkyc intercambiar en FixedFloat →
3 XMRS C priv 61trust 71
6/6 KYC-free
1 XRP = 0.025 LTC 0.025 LTC min 89.0868 · max 890868.5968 intercambiar en notkyc intercambiar en XMRS →
4 Baltex D priv 40trust 65 1 XRP = 0.0249592 LTC 0.0249592 LTC min 0.02612163 intercambiar en Baltex →
5 SideShift C priv 48trust 78 1 XRP = 0.02494658 LTC 0.02494658 LTC min 2.674512 · max 21251.028974 intercambiar en SideShift →
OctoSwap MEJOR A
Tasa1 XRP = 0.025509 LTC
Recibes0.025509 LTC
Límitesmin 6236.746913 · max 1069156.613625 XRP
Tasa1 XRP = 0.02538 LTC
Recibes0.02538 LTC
Límitesmin 0.8968 · max 10638.6444 XRP
Tasa1 XRP = 0.025 LTC
Recibes0.025 LTC
Límitesmin 89.0868 · max 890868.5968 XRP
Tasa1 XRP = 0.0249592 LTC
Recibes0.0249592 LTC
Límitesmin 0.02612163 XRP
Tasa1 XRP = 0.02494658 LTC
Recibes0.02494658 LTC
Límitesmin 2.674512 · max 21251.028974 XRP

Swapping XRP to LTC pairs two of the oldest payment-focused cryptocurrencies, both engineered for fast, low-fee transfers rather than smart contracts. You might rotate out of XRP after a price move, diversify away from Ripple-related regulatory exposure, or want LTC's PoW-secured settlement and broader merchant acceptance. No-KYC routing keeps the swap pseudonymous end to end - no account, no ID upload, just an XRP deposit address in and an LTC payout to your wallet.

// sobre este par

Why XRP -> LTC specifically

Both assets settle in minutes with negligible fees, so this swap is one of the cheapest cross-chain moves available. XRP finalizes in roughly 3-5 seconds on the XRP Ledger with fees measured in fractions of a cent, while Litecoin produces blocks every 2.5 minutes with typical fees under a cent. Net result: from send to confirmed LTC arrival, you are usually looking at 10-20 minutes including aggregator processing.

Common reasons users run this pair:

  • Reducing exposure to XRP's ongoing US regulatory overhang by rotating into a PoW asset with no issuer
  • Moving liquidity into LTC for use with MWEB (Mimblewimble) confidential transactions
  • Bridging into the Bitcoin-compatible scripting model without paying BTC mainnet fees
  • Consolidating exchange-distributed XRP balances into a single LTC cold-storage address

What to check before you swap

XRP requires a destination tag for many custodial deposit addresses - if the aggregator's deposit address asks for one, include it or your funds may be delayed. LTC has three address formats: legacy (L...), P2SH (M...), and bech32 (ltc1...). Confirm your receiving wallet supports the format the route uses; some older wallets reject bech32.

Other things worth verifying:

  • Whether the quote is fixed-rate (locked at submission) or floating (settled at execution) - XRP can move 2-3% in the 10 minutes a swap takes
  • Minimum and maximum amounts - very small XRP sends may fall below the 10 XRP reserve threshold logic on some routes
  • Refund address policy if the deposit arrives outside the rate window
  • Whether MWEB-enabled LTC addresses are supported as payout destinations

Practical tip: size the swap so the spread plus network fees stay under 1% of notional. For amounts under ~50 USD equivalent, fixed-rate quotes usually beat floating despite the worse headline rate, because slippage and minimum fees dominate at small sizes.

// preguntas
Do I need a destination tag when sending XRP to the swap?
Only if the aggregator's deposit address specifies one. Most no-KYC routes generate unique addresses per swap and do not require a tag, but if a tag is shown you must include it - sending without it can cause the deposit to be unattributed and require manual recovery, which usually means contacting support and proving ownership.
Can I receive LTC to a MWEB (Mimblewimble) address?
Some routes support MWEB payout addresses (ltcmweb1...), others reject them and require a standard legacy, P2SH, or bech32 address. If you want MWEB confidentiality, check the payout field validation before committing the deposit, or receive to a standard address and move into MWEB yourself afterward.
How long does an XRP to LTC swap take end to end?
Typically 10-20 minutes. XRP confirms in seconds, but aggregators usually wait for 1-2 ledger validations before broadcasting the LTC payout. Litecoin then needs 1-3 confirmations, each averaging 2.5 minutes. Network congestion on either chain is rare for this pair, so timing is predictable.
Fixed rate or floating rate for XRP -> LTC?
Fixed rate locks the quote at submission and protects you from XRP volatility during processing, but charges a wider spread (typically 0.5-1.5%). Floating rate settles at execution price - cheaper headline rate but you absorb any move. For amounts over a few hundred USD or during volatile sessions, fixed rate usually wins net of slippage.
Is there a minimum XRP amount for swapping to LTC?
Yes - most routes set a minimum equivalent to roughly 5-20 USD to cover network fees and quote spread. Sending below the minimum risks the deposit being treated as dust and either refunded (minus fees) or held until manually processed. Check the specific route's minimum before sending.
Will swapping XRP to LTC anonymously trigger any flags?
The swap itself is non-custodial routing - no KYC, no account. However, if your XRP originated on a regulated exchange, that exchange has a record of the withdrawal. LTC is a transparent chain, so on-chain analysis can link deposits to that withdrawal. For stronger unlinkability, route LTC through MWEB after receiving.
// relacionados